These are designed to snap into our 3D printed MOLLE items. Converts any of our existing MOLLE products to a BELT version. They print better, work better, are stronger, and much more versatile than the original NMAG BELT design. The loops are for a 1.5″ belt. AKA the belt you probably already own.
Author Archive | AbdnAllHope
Summer is here and the heat is on which makes this a good time to point out a couple of things about PLA and remind everyone just how hot it can get in your car. It is generally recommended that you store PLA in a cool dry place. According to the MSDS you should not expose PLA to temperatures over 120 degrees F. While the melting point of PLA is just over 300 degrees, the glassing point is much lower at 140 degrees. The glassing temperature is very important because that is a reversible point at which the plastic transitions from soft to hard when cooled, or from hard to soft when heated.
To put things into perspective lets consider the following link over at NOAA Heat Safety Resources and click on the section called “How Fast Can The Sun Heat A Car”.
The slideshow does a good job of illustrating that your cars interior can exceed the recommended storage temperature, and even the glassing temperature of PLA plastic. 3D printed PLA has proven to be very safe, reliable, and durable. Even able to withstand a lot of use and abuse, but everything has its limits. Exposure to excessive heat will damage your parts so it is very important that you take care and heed this warning.
Do not leave your 3D printed parts in the car. Your parts and your warranty depend on it!
The failure of our live beta was a complete success. Store is up and running. Glitches fixed. Pics and descriptions added, etc.
Looks cool. Is cool. Snap fit, quick draw Fire Strike holster.
Originally designed these as one size fits all. Due to so many variations in MOLLE gear I decided to add a few options.
Similar to the standard OFFSET except designed for groups of 2.
Since NERF magazines are so wide, I made these offset versions to get them as close together as possible. Normally adding 3 holders would take up 8 columns on a chest rig. Most SAPI cut plate holders are only going to have 6 columns. Thats a problem……..this solves it.
I think singles are less bulky and a little easier to deal with, but one can never have enough darts!
Been working on these for a while now. Orange on Orange and Orange on Clear for comparison. Orange PLA is close but not an exact match for the NERF Orange.
WHITE | WARM GREY | TAN | COOL GREY | BLACK | BLUE | NAVY BLUE | OLIVE DRAB | YELLOW | NEON ORANGE | ORANGE | RED
This image shows a comparison of the colors I had in stock at the time. Some colors are harder to get than others, so check the store for availability.